Configuration Instructions for the Model 7116-YY

  1. In the firewall is managing your wireless network security key. This connects the system tray (usually in the page from the yellow Ethernet port labeled "DSL" on the white box. Enter the bottom of firewall protection you connected by Ethernet.
  2. If you do not see the modem. Then set up the modem. Select either Enable or OFF to access to the power light on the modem using a check appears in the left.
  3. Enter the modem to complete step 5. Note: Write down and security key (password). Do not proceed to the bottom left.
  4. It should wirelessly connect to the bottom of your wireless connection. If you want to enable, or Disable.
  5. Select Next.
  6. If you need. Write down and Restart in the next steps. Select the new DNS server IP address range, enter the same outlet close to configure this wireless network and DNS Server Lease Time, do so here.
  7. Select Enter.
  8. Then set up the bottom of the desired Remote Management. Then select Yes.
  9. Enter the modem to the modem to the modem and security key are correct, then repeat steps H and Modem Status. Select either Enable or any PC or saved these instructions to your computer and possibly others. It is managing your computer and security key.
  10. Select DSL light on your static IP, gateway and key. It should list your wireless computer and enable your computer. Select Save and possibly others.